The Circulatic Line
Low Cost, process and heating steam for Industrial and Commercial
Application.
Recirculating Water Tube Units to: 600 BPH and 530 psig 20,700
lbs. per hour.
Key Features of The Circulatic Vapor Steam Generator
• Rapid start up - from cold start to full load in five minutes.
• Easy access to burners - end mounted burner is simple to
maintain.
• High quality steam - guaranteed 99% + dry steam.
• Low cost coil replacement - multiple coil design permits damaged
coil replacement.
• Minimal soot problems - separate combustion chamber prevents
coating coils with partially burned fuels.
• Minimum prepurge energy loss - smaller size unit allows proper
prepurge in seconds.
• Low fuel requirements - air preheating and refractory lined
chamber for complete combustion.
• Simplified fuel switching - only have to turn selector, no
burner changes required.
• Quick response to load changes - cycle time of less than one
minute.
• Minimum off-on cycling - turndown ratios up to 10-1 for handling
wide range of loads.
• Complete line - nine sizes to permit proper selection for any
application.
• Low installation costs - packaged, compact units require only
60% of floor space needed for firetube boilers.
• Long life with minimum maintenance - coil design pressure of
1000 psig result in thicker coil walls for longer life.
• Easy installation skid mounted assembly including control
console.
• Optimum efficiency at any load - full modulation of water, air,
fuel & output.
• Maximum safety - steam drum located outside of firing zone.
For more details, just visit our website.
